Access Control Point Standard Guard Booth:
• 4' x 8' - Houses one security person and is equipped with a standard
20" shelf for AVB controls and monitoring displays
Other common sizes available:
• 6' x 8' - Equipped for one or two security personnel with space for multiple
controls and displays
• 10' x 10' - Sized to function as an electrical shelter or guard booth.
Accommodates multiple security personnel with shelving options for multiple
controls and displays
• 10' x 12' - Equipped for multiple security personnel, with multiple display
and shelving options
Short lead times available:
USR can deliver your booth in as little as six to eight weeks depending on your facility's needs and the condition of the areas in which the security booth will be placed.
USR's turnkey installations include:
• Excavation and custom concrete pad foundation
• Terminating and installing all control and display systems
• Providing and installing conduit and wiring for connection to power supply
• Shipment and placement of the security booth
FEATURES
• Guard booths are prefabricated as specified
by the UFGS specifications, section 13 34 21.
• Pre-assembled, designed, and structurally
engineered. 14 gauge steel mechanical square
tubing framework meets ASTM-A500 standards.
• 14 gauge galvanized exterior panel walls and 16
gauge interior panels, fabricated and insulated to
a minimum R-12. All joints pressure sealed against
any weather intrusion.
• Top-hung, horizontal sliding doors with an extruded
aluminum frame. Doors come with heavy duty
hardware, keyed lock and weather stripping.
• Non-slip flooring for safety. Anti-fatigue mats
can be provided upon request.
• Rust inhibitive high build epoxy primer and urethane
finish coat. 10 standard colors / graphics, multi-
color also available.
• 1500-4400 watt, 110/220 volt HVAC with fan and
internal wall mounted thermostat control. Ceiling
mounted unit optional. Bullet resistant shroud
covering HVAC system available for ballistic
rated models.
• Four 20 amp, 120 volt, GFI duplex wall outlets.
• Pre-wired electrical power service in accordance
with U.L. and NEC standards for quick and easy
installation on the project site. 125 amp, 120/240
volt, three wire, single phase, 8-16 circuit breaker
panel.
BALLISTIC RATED AVAILABLE
• All exterior window frames are hot rolled formed
angle framed with concealed zinc plated exterior
fasteners and glazed with tinted laminated
safety glass to reduce specular transmission.
• Walls, ceilings, windows, and doors are
manufactured with material that meets or exceeds
BULLET RESISTANT LEVEL I, II, III, or IV as
identified by UL Standard 752. This range covers a 9mm handgun up to a .30 caliber rifle.
For More Information & Ordering Instructions On Our Crash Certified USR GRAB Vehicle Arrest System Please Call: 615.224.0400
